Jinhu Color Powder Coating Co.Ltd
FEIHONG POWDER COATING CO. LTD, Paint for healthy,E-friendly and colorful life
Add to Cart
RAL2007 Luminous bright orange electrostatic thermoset powder coating for Exercise equipment
The electrostatic spray method uses a pump to force the powder and air through feed hoses to a spray gun. The spray gun provides a charge to the powder. The charged particles are sprayed onto the component, which is electrically grounded through metallic hangers or hooks. The component is then placed in an oven to cure the powder coating.
On Navy ships, powder coating is not authorized for use on components, covers, or any parts to be installed in potable, reserve feed water, or freshwater drain collecting tanks aboard nuclear powered ships. The use of powder coatings on submarines is restricted. Refer to NSI 009-32 for more information.
Exterior portable bolted louvers intakes and uptakes and watertight doors can be powder coated by the fluidized bed method. The louvers and doors are coated with a MIL-PRF-23236 Type VIIIa powder coat primer followed by a MIL-PRF-24712 TGIC polyester topcoat. NSI 009-32 also specifies single coat powder coating requirements for removable parts in non-immersion service found in both exterior and interior environments, as well as interior wet or immersion application areas.
Physical Properties
| TP-1 | TP-2 | ||||
|---|---|---|---|---|---|
| Flexibility | BS3900 E1 | Pass | mm | 6 | 5 |
| Scratch | BS3900 E2 | Pass | kg | 4 | 4 |
| Impact | BS1391 | ||||
| Direct | Pass | in lbs | 80 | 100 | |
| Reverse | Pass | in lbs | 80 | 100 | |
| Erichsen Cupping | BS3900 E4 | Pass | mm | 6 | 8 |
| Cross Hatch | BS3900 E6 | Pass | % | 100 | 10 |
Our data sheets and sales literature are issued for the purpose of supplying general product information. In view of the variation of conditions under which products may be used or this information may be applied, we cannot accept responsibility for loss, damage or accident of any nature [or infringement of patent rights] which may result from the use of application of the information or the products. For specific confirmation of any details in the product information or use and application please apply to the company in writing.
Household appliances.
Automotive parts.
Bicycle components.
Coating of aluminum extrusions.
Wind powers.
Agricultural equipment.
Aerospace areas.
Interior and exterior furniture.
Architecture construction.
Metal fence and rails.
Food service areas.
Goods display, etc.
| Testing Items | Standard | Data |
| Appearance | Flat And Smooth | |
| Coating Thickness | GB/T6554-2003 | 50~70mm |
| Gloss(60°) | GB/T9754-2007 | From 2%~100% to All Gloss |
| Impact Resistance | GB/T1732-1993 | 50kg.cm |
| Bending Performance | GB/T6742-2007 | 2mm |
| Cupping | GB/T9753-2007 | 8mm |
| Adhesion Force | GB/T9286-1998 | 0 Grade |
| Hardness | GB/T6739-2006 | 2H |
| Resistant to Salt (1000 Hours) | GB/T1771-2007 | No Change For Coating Appearance |
| Humidity And Heat Resistance (1000 Hours) | GB/T1740-2007 | No Change For Coating Appearance |
| Chemical Medium Resistance (240 Hours) 5%H2SO4 5%HCl 5%NaOH 5%NaCl | GB/T1763-1979 |
No Change For Coating Appearance No Change For Coating Appearance No Change For Coating Appearance No Change For Coating Appearance |
| Heat Resistance | GB/T1735-2009 | It Can Reach Between 220℃/20minutes And 240℃/40minutes According To Color And Different Requirement |
