Jinhu Color Powder Coating Co.Ltd
FEIHONG POWDER COATING CO. LTD, Paint for healthy,E-friendly and colorful life
Add to Cart
RAL1012 lemon yellow antique Textured Powder Coating for Ferrous metals
The powder coating products featured in this color chart are intended for interior applications only. Top coating any of these products with a clear exterior grade powder coating will not produce a weather resistant coating system.
Each family of RAL colors is displayed grouped by connectors, showcasing the finishes and gloss levels of the specific RAL color family available in stock. It is possible to custom-match other RAL colors upon request.
An epoxy-based powder coating with excellent chemical and corrosion resistance, very good
mechanical and flow properties and good storage stability. It provides excellent coverage.
It is ideal for laboratory equipment, machinery parts, pump housing as well as surfaces where increased chemical resistance is required.
Sort by chemistry:
Epoxy Polyester /Hybrid powder coating
Epoxy Powder Coating
Polyester TGIC -Free powder coating
Polyester TGIC Powder coating
Polyurethane powder coating
Sort by function:
Anti-gassing Powder Coating for cast steel
Clear Topcoat Powder Coating
Heat Transfer Powder Coating
High Temperature Resistant Powder Coating
Metallic/Peal Powder Coating
Zinc Rich Epoxy Primer Powder Coating
| Gloss Level | high-gloss(82%) |
| Surface Finish | Smooth |
| Powder Property | |
| Appearance | Fine powder |
| Particle Size | Average 32-40μm |
| Specific Gravity | 1.3-1.5g/cm3 |
| Coverage | 7-8 square meter per Kg at 80μm film thickness |
| Application Recommendation | |
| Applicatoin | Corona |
| Application Voltage | 60-90 KV |
| Gun to Component Distance | 15-30 CM |
| Film Thickness | 80-90μm |
| Curing Temperature | 190℃(Object temperature) for 15 minutes |
| Powder Coated Film Mechanical Properties | |
| Adhesion | Cross-cut (2mm), no loss of adhesion |
| Impact Resistance | Direct & Indirect 50kg/cm |
| Pencil Hardness | 2H |
| Flexibility | 7mm Mandrel |
| Bending Test | 3mm |
| Powder Coated Film Chemical Resistance | |
| Salt Spray Test | 5% NaCl Solution for 1000 hours - No change |
| Acid Resistance | 5% HCL for 48 hours dip test - No change |
| Alkali Resistance | 5% NaOH for 48 hours dip test - No change |
| Surface Preparation | |
| All surfaces shall be degreased and pre-treated for optimal performance before application | |
| Aluminium | Yellow chromate or green chromate/phosphate |
| Ferrous metals | Zinc phosphate or Iron phosphate |
| Zinc coated metals | Zinc phosphate or choromate conversion |
| Exterior Durability | |
| QUV A 340 Resistance | 240 hours - 70% gloss retention |
